How to Deal with Low Water Pressure

If you are unable to wash your dishes or unable to get your laundry done in time, it is probably because of low water pressure. This is very annoying as your multitasking daily tasks are often taking longer time. In this situation, you need to investigate your home water supply system. Whether water pressure is low or high either causes hindrance in the efficiency or damages the system.

There are many reasons that lead to low water pressure. If your whole area is experiencing the same issue you need to call your water supplier. Get a petition signed by society members and submit it to the corporation.

If the problem is internal the problem is with the fixtures like valves or pipes.  The very common problem that occurs is corrosion of pipes or jam that restricts water flow.

Read further: Everything You Need to Know Before Picking Any Water Softener Systems

These 5 tips will help you to decode low water pressure. Let’s begun:

Check Shut Off Valves:

This may work sometimes. Shut off the valves near to faucets and let the one, open which you want to use. Even you can shut off the main valve present near the meter for plumbing work.

Generally, they are left half-open or children close them while playing this also is a reason for sluggish flow.

The primary water valve near the water meter needs to be adjusted sometimes. This will need little precision and hard work but will increase the stream.

For my lads facing low water pressure issues, I recommend these UK pumped electric showers. Especially, Triton T80si and T150Z.

Trace Leaks and Drips:

Main water pipeline sometimes has leakage. Usually, the leaking places are beneath the sink, toilet bowl, faucets, and appliances. Otherwise, it will be very difficult.

If you experience damp ceilings or walls the leakage is in the within. Just read your water meter when water is not in use, you will get to know. For this follow the simple leak detection method:

  • Shut off the primary water valve for 30 minutes. Do not use it.
  • Jot down the water meter reading.
  • After half an hour check the water meter again, if it is changed then there is a leakage.    

Cleaning Aerator:

If only one or two fixtures are having low water pressure, then this tip is solely for you.

Dishwashers, sinks, faucets, and showers have aerators that maintain the water pressure. It has a peripheral layer at the front this might have collected sediments of hard water. Unscrew the end part of fittings and wash them with water. Later dip in the vinegar solution for 30 minutes and wash them again. After cleaning the aerator, the water flow will rise.

Examine Water Heaters:

This solution is for low hot water pressures in heaters. Look for sediments in the tank and flush them out. If you notice that pressure is reduced while opening the tapped call your plumber soon.

More on Info Dodos: Mira Showers vs Triton – Which is the Best Electric Shower Brand in UK?

Replacing Water Filters:

This solution is for houses using single faucet filtration or treatment systems.

If you have a filtration system you need to replace the filters. Maybe they are clogged which is the cause of decreased water flow. With water treatment system, replacements are the only option. For which you need to call upon a professional.

Leave a Reply

Your email address will not be published. Required fields are marked *